左支座零件的机械加工工艺规程及夹具设计_毕业设计.docVIP

摘 要 根据左支座零件图，制订加工工艺规程及专用夹具设计。首先，在分析左支座零件的毛坯尺寸参数和工艺要求的基础上，进行了零件的工艺分析和生产类型的确定，安排了合理的加工工艺路线，其中包括：粗、精基准的选择。然后，确定了机械加工余量、切削用量和基本工时，选择加工设备和工艺装备。最后，对车床左支座的两个工序的加工进行了专用的夹具设计。 关键词：左支座；工艺规程；工艺路线；夹具设计Abstract Enable producing the target in process of production (raw materials, the blank , state of quality and quantity on part become always ) take place direct course of change ask craft course, if the blank is made, machining, heat treatment , assemble etc. and call it the craft course. In the course of making the craft , is it confirm every erector location and worker step that process need this