济南大学框架毕业设计计算书.doc

毕业设计 题 目学 院 专 业 班 级 学 生 学 号 指导教师 二〇一四 年 月 日摘 要 本工程为设计，共设计五层，层高3.9m，室内外高差0.45m。总建筑面积5286㎡2~5层均设7，3个楼梯，4个1层设有6个教室和两个办公室，并且每层都有一个资料室，可以满足老师同学查阅。 本在设计过程中，规范要求计算，运用Auto CAD和PKPM等制图软件辅助设计绘图。 通过设计，熟悉教学楼及其功能要求，立面处理及总平面布置等方面的知识，设计任务书做出合理的方案图施工图。  ABSTRACT This project is designed Huangpi middle school building, there are a total of five designs, floor storey 3.9m, another indoor and outdoor height of 0.45m. The total construction area of ??5286 square meters. 2 to 5 layers located seven classrooms, three staircases, four bathrooms, two offices; 1 layer has six classrooms and two offices, and each floor has a library, meet the teachers and students access. The overall design uses a frame structure, you first need to calculate the necessary reinforcement of roof and floor panels, and then need to determine the stiffness of the beam-column line diagrams and calculation framework. Then statistical dead load and live load, wind load and seismic floor. Finally, calculate the internal forces under the action of lateral loads and vertical loads, the results of calculations then a combination of internal forces. Because of seismic codes, such as strong column weak beam and strong shear weak bending of specifications for the column end moment and end-column beam end shear Finally, the internal force adjustment, according to the data adjustment coefficients to be beams and columns cross-sectional design. In the design process, in accordance with the specification requirements in order to calculate and use Auto CAD and mapping software such as PKPM aided design and drawing. By teaching building design graduate, school buildings need to be familiar with some of the requirements and their functions constitute professional knowledge processing and overall arrangement of the facade plane, etc., made ??in accordance with the requirements of the de