特迪亚tedea 3410称重传感器.docVIP

Model 3410/11 Shear Beam Load Cells Features ? Capacities: 1000 - 4000 lbs ? Low profile for industrial platforms ? Nickel plated alloy steel construction ? 6 Wire sense circuit ? IP67 protection ? Approved to OIML R60 and NTEP ? BASEEFA and Factory Mutual options Models 3410/3411 are low profile shear beam load cells designed for high accuracy platform scales, pallet scales and process weighing applications. Model 3410 has a 0.53 inch thru hole for a load application, while the model 3411 has a 1/2-20 UNF threaded loading hole. It has high immunity to shock or side loading, and is available in 2 or 3 mV/V sensitivity. Approved to OIML, NTEP, BASEEFA and Factory Mutual approval standards. Nickel plating and full environmental sealing assure long term reliability. A stainless steel option is available for use in harsh or corrosive environments. The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resis- tance due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics. Also Available from Tedea-Huntleigh The Model 3410 load cell can be supplied with self leveling rubber feet for use in low profile platforms. Cellmates and Tank mounts are also available, see the Tedea-Huntleigh Load Cell Accessory Catalog for full details. The model 3420 is manufactured in 5000, 7500 and 10,000 capacities. EXCELLENCE IN LOAD CELLS 广州南创电子科技有限公司 Model 3410/11 High Accuracy Compression Load Cells GRADE Z E F C3** UNITS Lbs. mV/V Rated Capacities :Metric Rated Output 1000, 1500, 2500, 4000 3.0 ± 0.10% Temperature Effect : On Zero Zero Return after 30 minutes Total Error According to OIML R60 Temperature Effect: On Output Zero Balance 0.015 0.070 0.075 0.007 0.007 0.050 0.050 0.004 0.0035 0.0250 0.0300 0.0014 0.0023** 0.0170 0.0200 0.0012 ±% of Rated Output /°C ±% of Applied Load ±% of Rated Output ±%