IR2166_中文版.docVIP

IR2166 PFC BALLAST CONTROL IC 功率因数校正和镇流器控制集成电路 Features特点 ? PFC, Ballast control and half-bridge driver in one IC 功率因数校正，控制和镇流器半桥驱动器在一个集成电路 ? Critical conduction mode boost type PFC 临界导电模式升压型功率因数校正 ? No PFC current sense resistor required 没有功率因数校正电流感测电阻的要求 ? Programmable preheat frequency 可编程预热频率 ? Programmable preheat time 可编程的预热时间 ? Programmable run frequency 可编程频率 ? Programmable over-current protection 可编程过流保护 ? Programmable end-of-life protection 可编程末期保护 ? Programmable dead time 可编程死区时间 ? Internal ignition ramp 内部点火坡道 ? Internal fault counter 内部故障计数器 ? DC bus under-voltage reset 直流母线电压复位 ? Shutdown pin with hysteresis 带迟滞的关断引脚 ? Internal 15.6V zener clamp diode on Vcc 在VCC内部15.6V齐纳钳位二极管 ? Micropower startup 150μA 微功率启动 ? Latch immunity and ESD protection 锁存免疫和静电放电保护 ESD（Electro-Static discharge）的意思是“静电释放”。 Description The IR2166 is a fully integrated, fully protected 600V ballast control IC designed to drive all types of fluorescent lamps. PFC circuitry operates in critical conduction mode and provides for high PF, low THD and DC Bus regulation. The IR2166 features in-clude programmable preheat and run frequencies, programmable preheat time, pro-grammable dead-time, programmable over-current protection, and programmable end-of-life protection. Comprehensive protection features such as protection from failure of a lamp to strike, filament failures, end-of-life protection, DC bus undervoltage reset as well as an automatic restart function, have been included in the design. The IR2166 is available in both 16-lead PDIP and 16-lead narrow body SOIC packages. IR2166是一个完全集成，充分保护的600V镇流器控制IC设计驱动所有类型荧光灯。 PFC电路工作在临界导通模式并提供高功率因数，低THD和DC总线调节。在IR2166的功能clude可编程预热和运行频率，可编程预热时间，亲可编程死区时间，可编程过电流保护，以及可编程年底的生活保障。全面的保护功能，如从失败的保护罢工一盏灯，灯丝故障，结束生命的保护，DC总线欠压复位以及自动重启功能，已被列入设计。 IR2166是16引脚PDIP和16引脚（窄体）SOIC封装。 请注意，这个数据表包含了先进的信息可能会改变之前的产品发布到生产。 Absolute Maximum Ratings 绝对最大额定值 Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage p