DSP-Mitra-9IIR Digital Filter.ppt

284 a stable allpass function 9.5 Spectral Transformations of IIR Digital Filters (II) 9.5.1 Lowpass-to-Lowpass Spectral Transformation(P379) is a function of and mapping relation see Figure 9.7 (P380) 9.5.1 Lowpass-to-Lowpass Spectral Transformation (II) Redesign the lowpass filter to move the passband edge to 0.35π Lowpass-to-Lowpass Spectral Transformation Example Example 9.4 Consider the lowpass digital filter Lowpass-to-Lowpass Spectral Transformation Example 9.5.2 Other spectral Transformation(P381) Transformation: transformation parameter: Lowpass-to-Highpass Spectral Transformation Lowpass-to-Highpass Spectral Transformation Example Example 9.5 Consider the lowpass digital filter Redesign a highpass filter with the passband edge at 0.55π Lowpass-to-Highpass Spectral Transformation Example Generation of Allpass Function Using Matlab 9.5.3 Spectral Transformation Using Matlab(P383) 9.5.3 Spectral Transformation Using Matlab (II) 9.6 IIR Digital Filter Design Using Matlab(P384) Order Estimation For IIR filter design using bilinear transformation, to determine the order and bandedge using Matlab is as follows: Order Estimation Example Determine the minimum order of Type 2 Chebyshev digital highpass filter with following specifications: 9.6 IIR Digital Filter Design Using Matlab (II) Filter Design For IIR filter design using bilinear transformation, to design IIR filters using Matlab is as follows: Use to plot the magnitude and phase of the frequency response of the filter 9.6 IIR Digital Filter Design Using Matlab (III) * * ? Specifications for DT filters ? Selection of Filter Type ☆ IIR filter: design from continuous-time filters (1) Design of CT filters (2) Impulse invariance (Problem 9.6) (3) Bilinear transform ? Spectral Transformations of IIR Filters ? IIR Filter Design Using Matlab Chap.9 IIR Digital Filter Design(P366) 9.1 Introduct