IND-7660数字显示器.docVIP

深圳市现代豪方仪器仪表科技有限公司 王工 Model: IND 7660 This indicator can be connected with strain gauge type load cell and pressure transducer to show data detected by those transducers. It has various functions to process data, form judgement, and output to outer appliances. FEATURES Functional Digital CalibrationInstead of actual load calibration, this indicator adopts digital calibration by inputting rated voltage output mV/V . Easy to Check Graphic LCDEasily make settings on the indicator in dialog style by checking messages on the graphic LCD. Various Digital ProcessingAnalog signals from transducers will be effectively converted into digital signals by A/D converter at the rate of 640 times/sec. Intelligent Judgement FunctionBy lighting on the HI, OK, or LOW lamp and proceeding signal output to judge the test result. Range of Gain Adjustment Full scale setting of 0.5mV/V~2.5mV/V Value Display Range 10000 Linearity 0.05% of F.S. 1digit A/D Converter 16 bit 640 times/sec. LED Lamp 4 lamps Red HI, LOW Green OK Yellow HOLD Key Switch 4 switches ZERO, MENU, RESET, HOLD Comparator Function Top/bottom value setting Data Hold Function Peak, bottom, signal from outer appliances, peak or bottom data in limited area, limited period top point or change point Output Signal Open collector O.L, HI, OK, LOW Input Signal Contact point or open collector ZERO, HOLD, RESET Outer Power Supply DC24V for input/output signal isolation Optional Models Indicator unit with RS-232C interfaceIndicator unit with analog output 4-20mA Power Supply AC 85V ~ 265V Operation Condition Temperature: 5 ~ 40 oCHumidity less than 85%RH No bedewing Outer Dimension 96W x 96H x 155D mm Pane cut 92 x 92mm Weight Approx. 900g The above specifications are subject to change without notice. DIGITAL INDICATOR MODEL:IND-7660 Enjoying Plenty of Functions for Automatic Control This indicator can be connected with strain gauge type load cell and pressure