南昌航空大学出租车计价器课设.docVIP

源程序： 模块化 main.h #ifndef _MAIN_H_ #define _MAIN_H_ #includereg52.h #define uint unsigned int #define uchar unsigned char #define ulong unsigned long /*---------------------位申明------------------------*/ sbit rs = P2^0; sbit rw = P2^1; sbit en = P2^2; sbit key1 = P1^0; //清除键 sbit key2 = P1^1; //确认键 sbit key3 = P1^2; sbit key4 = P1^3; sbit key5 = P1^4; sbit key6 = P1^5; sbit key7 = P1^6; sbit key8 = P1^7; void Delay(uchar t); #endif 2 main.c #include main.h #include lcd1602.h uchar number1[16] = D . km P:1.60; uchar number2[16] = Price: $; ulong dis = 200; ulong price = 0; uint perk = 160; uchar flag = 0; uchar state = 0; /*----------------------------------------------------- 函数名称：Delay() 函数功能：延时t ms 入口参数：t 出口参数：无 ------------------------------------------------------*/ void Delay(uchar t) { uchar x,y; for(x=t; x0; x--) for(y=110; y0; y--); } /*----------------------------------------------------- 函数名称：Display() 函数功能：显示路程和单价信息 入口参数：路程X,和单价 P 出口参数：无 ------------------------------------------------------*/ void Display(ulong x, uint p) { number1[1] = x/10000%10 + 0; number1[2] = x/1000%10 + 0; number1[3] = x/100%10 + 0; number1[5] = x/10%10 + 0; number1[6] = x%10 + 0; number1[12] = p/100%10 + 0; number1[14] = p/10%10 + 0; number1[15] = p%10 + 0; if(number1[1] == 0) { number1[1] = ; if(number1[2] == 0) { number1[2] = ; } } Print(0x80,number1); } /*----------------------------------------------------- 函数名称：Show_Price() 函数功能：显示最后的价格 入口参数：单价 temp 全局变量 dis 出口参数：无 ------------------------------------------------------*/ void Show_Price(ulong temp) { float value = 1.0; if(dis = 300) price = 600; else { price = temp*(dis - 300); value = price/100 + 0.5; price = (ulong)value; price += 600; } number2[8] = price/100000%10 + 0; number2[9] = price/10000%10 + 0; number2[10] = price/1000%10 + 0; number2[11] = price/100%10 + 0; number2[12] = .; number2[13] = price/10%10 + 0; number2