现场文明生产管制度.docVIP

文件编号: ****／**－**－** 文件版本号: 0/A版 *****有限公司 现场文明生产管理制度 编 制:*** 审 核:*** 批 准:*** 22009-09-28发布 2010-01-01实施 ***********有限公司 发布 目的 为创造整洁、严肃、文明的工作环境，确保生产正常序，特制定本制度 button. Select [login rule] button above the [rule number] menu under ... Then open the barcode generator for the barcode002 part of the Properties dialog box, click the [factor/control] button in the destination edit box,Open the barcode generator for the barcode003 part of the Properties window, click the [factor/control] button, and then at the destination use the Ctrl + v, to enter into the well on the 2nd floor you just copied right 2nd truck name (example PART_STORE_00099), then click on [OK] button. Open 2 right up 3rd truck Properties window, use the Ctrl + c will [summary] property names are copied. Open the barcode generator for the barcode004 part of the pop-up menu in the property dialog box, click the [factor/control] button in the destination using the Ctrl + v, to enter copy 2 3rd truck name right (case of PART_STORE_00100), then click the [OK] button. Then use Lesson3-2.emu as the file name to save the other. Click on menu bar | simulation | start | or time column in the [start] button, you see the goods are put on the conveyor belt, and robotic loading pallets for through the pulley tracks were moved to the automatic tridimensional warehouse storage. If Tray 1 out of the library, select the tray popup menu [IOSection Library instructionmenu (1 layer). If the tray 2 out of the library, right-click with the mouse on the tray in the pop-up menu, select [IOSection Library instructionenu (2). From 2 out of the tray after it has been transferred to the transit point discharge, workers unloaded the goods. Empty tray again by rail back to automatic stereoscopic warehouse. Remove the cargo by conveyor belts was transferred to corresponding cage inside the vehicle. Note 1: simulation before the start, please set the environment for th