MF_RC522射频识别参考程序注释new.docVIP

MF RC522 射频识别参考程序注释 串口读取的数据 //------------------------------------------ ucAddr = ((Address1)0x7E)|0x80;//变化成有效的地址形式，最低位为0，最高位为1时候时，从MFRC522读出数据，最低位为0，最高位为0时候时，往MFRC522写数据，参考39页 // 读SPI数据 //------------------------------------------ unsigned char SPIReadByte(void) { unsigned char data SPICount; // Counter used to clock out the data unsigned char data SPIData; SPIData = 0; for (SPICount = 0; SPICount 8; SPICount++) // Prepare to clock in the data to be read { SPIData =1;