双线纽扣结手链戒指的编法详细图解教程.docVIP

双线纽扣结手链和戒指的编法详细图解教程 纽扣结是中国结的一种，结形如钻石，故又称钻石结。纽扣结象征着吉祥喜庆，并且还预示着情侣之间永结同心，是男女朋友间常见的互赠小饰品。双线纽扣结编法是比较简单的，主要是最后的结体调整过程，需要细心并且耐心。下面跟着中国纽扣交易网的小编一起动手操作下吧： 　　纽扣结是中国结的一种，结形如钻石，故又称钻石结。除当纽扣用，也是很漂亮的装饰结。如再与其他的装饰结相搭配，又可构成一对对美丽的盘扣。同时，通常在编制的中国结手链中也以此收尾。 纽扣结象征着吉祥喜庆，并且还预示着情侣之间永结同心，是男女朋友间常见的互赠小饰品。 纽扣结有很多种，双线纽扣结是其中一种。 双线纽扣结编法是比较简单的，主要是最后的结体调整过程，需要细心并且耐心。 双线纽扣结手链和戒指的编法 双线纽扣结手链和戒指的编法 双线纽扣结手链和戒指的编法 双线纽扣结手链和戒指的编法 双线纽扣结手链和戒指的编法 双线纽扣结手链和戒指的编法 双线纽扣结手链和戒指的编法 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width 1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautifu