1WORK MEMO(07.08).docVIP

WORKING MEMO July 1. “U” type bolt cooperate with screw hole wasn’t suitable, the bolt too small or the hole too broad. And the remain screw of the “U” type bolt was too longer after bolted. 2. All side block scuppers welding seam should be re-inspection due to one welding seam haven’t completed. 3. 1080-1# HS13(s) pressure air pipe and steam pipe was to be re-inspect. 4. 1080-1# HS14(P) one vent pipe interior side should be cleared and galvanized. 5. 1080-1# HS12(P) Fire pipe contact structure at No.7 frame. 6. 1080-1# HS14(p) Fire pipe contact structure. 7. 1080-1# HS13(p) and HS12(s) soundi