第一章 设备管理.pptVIP

第一章 设备管理 4、创建文件系统（可选） #newfs /dev/vx/rdsk/diskgroup/volume(ufs) #mkfs –F vxfs /dev/vx/rdsk/diskgroup/volume(vxfs） * 第一章 设备管理 七、The ufsrestore Command ufsrestore options [ arguments ] [ filename ... ] x Restore only the files named on the command line. v Display path names as they are being restored (verbose mode). f dump_file 恢复文件例子 #ufsrestore xvf /dev/rmt/0 /etc/hosts * 第一章 设备管理 八、How to Move a File System 1. Unmount the file system. # umount /opt 2. Check the file system with fsck. # fsck /dev/rdsk/c0t3d0s5 3. Dump the file system to tape. # ufsdump 0uf /dev/rmt/0 /opt 4. Use the format utility to partition a new disk. 5. Create the new file system on the new disk. # newfs /dev/rdsk/c0t1d0s1 6. Check the file system with fsck. # fsck /dev/rdsk/c0t1d0s1 * 第一章 设备管理 7. Mount the new file system on the appropriate mount point. # mount /dev/dsk/c0t1d0s1 /opt # cd /opt 8. Restore the file system. # ufsrestore rvf /dev/rmt/0 9. Remove the restoresymtable. # rm restoresymtable 10.Check the restored file system with fsck. # fsck /dev/rdsk/c0t1d0s1 11.Edit the /etc/vfstab file to change the device path. * 第一章 设备管理 九、How to Restore the root (/) File System 1. Load and boot the release media to run level S. ok boot cdrom -s 2. Create the new file system, if necessary. # newfs /dev/rdsk/c0t3d0s0 3. Check the file system with fsck. # fsck /dev/rdsk/c0t3d0s0 4. Mount the file system to /a and change to that directory. # mount /dev/dsk/c0t3d0s0 /a # cd /a * 第一章 设备管理 5. Restore the root (/) file system. # ufsrestore rvf /dev/rmt/0 6. Remove the restoresymtable. # rm restoresymtable 7. Run the installboot program to create the boot block. #