Origin绘图教程.ppt

* * * * * * * * * * * Ctrl+方向键来选择 * * * * * * * * Ctrl+左右方向键可使数据点左右移动。 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 选项对话框 （Options…） 页面对话框（Page…） 尺寸 END §9 Origin综合应用举例 二维多轴系图绘制举例 1) Select columns B,C and create a scatter plot. 2) Double-click on the X-axis to open the axis dialog box; Click on the Scale tab and set the scale from -20 to 20. Set Rescale to Manual. Select the Vertical icon on the left panel (for the Y axis) and set the scale from 0 to 16. Set rescale to Manual. Click OK. 3) Double-click on the Y-axis. Select the Grid Lines tab, make the Horizontal icon in the Selection box is selected, and check X=0. Select the Vertical icon in the Selection box and under Additional Lines, check Opposite. 4) Choose the menu option Edit: New Layer (Axes): (Linked): Top X+ Right Y. 5) Single-click on the Layer 1 icon in upper left corner of the graph (this activates the layer containing the plotted data) and then right-click inside the graph axes, choose Plot Details, and click on Layer 2 in the left side of the dialog box. Select the Size/Speed tab and set Left=50, Top=0, Width=50, and Height=100. Click Apply. 6) On the Display tab, make sure Clip Data to Frame is checked. 7) Right-click on Layer 2 icon (upper left corner of graph) and select Layer Contents in short cut menu and add mag_d to the Layer Contents 8) Double-click on top X-axis and set X and Y scales from 0 to 40, and from 0 to 16, respectively. Double-click on bottom X-axis and set X and Y scales from -20 to 20, and from 0 to 16. Click OK. 从图中提取数据 如何从下面发表文章中的图提取数据 1. 点击 “Digitize”按钮 2. Paste your image into this graph window. 3. Name the object Image1 and attach it to the page. 4. Click the Digitize... button. * * * * * * * * * * * * * * * * * * * * * * * 绘制含数据标签( Label ) 图 如果需要在图形数据上加注标签( 如数值或其他标识等) ， 则需要绘制含数据标签图形。 数据要求: 用于作图的数据包含Y 列。 绘图步骤： 选中某列将其设置为Y列 选中X、Y 两列，做出理想的图形； 双击数据点，打开Plot details → Label →tick Enable