预弯机毕业设计3.doc

毕 业 论 文 课题名称 及维护 系/专 业 机械工程系/机电一体化 班 级 机 电 学 号 学生姓名 指导教师： 2009 年 5 月 25 日 及维护 机 电0摘要 It is Tachih LSAW pipe production line, one of the main equipment, it is useful to the system through the milling side of the plate to bend the two side panels, so that the plate edge to become the shape of involute. Department of plate steel edge radius of curvature of the finished tube with the same edge of the plate inside, and gradually change to straight, the time when the steel plate forming the edge of non-deformed radius of curvature to the plate to participate in the second part of the deformation, with the result that edge radius of curvature radius of the pipe and finished exactly the same shape after the steel pipe to ensure roundness. It is characterized by the arrangement in a base under the action of the two hydraulic machines, at the same time on both sides of a steel plate pre-bending. Pre-bending a steel plate is carried out in sub-paragraph each time the length of pre-bending mold according to the length of line segment and the length of the sub-plate case. Key words: Tachih LSAW； 目 录 ．........................4 1.1 机器的性能..........................................................................................................4 1.2 主要技术参数......................................................................................................4 ．.................................................................... ..................5 2.1机器的主要部分和工作过程...............................................................................5 2.2 机器主要部件、组件的结构和工作原理..........................................................6 第3章 ．.............................................................................................10 3.1液压系统安装.......................................................................................................10 3.2液压系统工作介质及加注..........................................................................