基于51单片机的DS1302+LCD1602+DS18B20小综合.docVIP

#include reg52.h #include intrins.h #define uint unsigned int #define uchar unsigned char #define first_line 0x80 #define second_line 0x80+0x40 sbit LCD_EN=P2^7; sbit LCD_RS=P2^6; sbit LCD_RW=P2^5; sbit key_1=P2^4; sbit key_2=P2^3; sbit key_3=P2^2; sbit DS_CLK=P3^6; sbit DS_IO=P3^4; sbit DS_RST=P3^5; sbit DQ=P3^7; //定义DS18B20的数据管脚 sbit ACC0=ACC^0; sbit ACC7=ACC^7; uchar code line_one[]=20 - - ; //uchar code line_two[]= : : ; uchar code line_two[]= : : 27.3C; uchar t0_cnt,mode_cnt=0,key_flag=0; char count,hour,second,minute,day,week,month,year; uint temperature,symbol;//用于存储DS18B20采集的整个数据 uchar DS18B20_H;//用于存储DS18B20数据采集的整数部分 uchar DS18B20_L;//用于存储DS18B20数据采集的小数部分 uchar init_18B20_fail; void delay_us(uint us) { while(us--){ //_nop_(); } } void delay_ms(uint num) { uchar i; while(num--){ for(i=250;i0;i--){ _nop_(); _nop_(); _nop_(); _nop_(); } } } bit busy(void) { bit result; LCD_RS=0; LCD_RW=1; LCD_EN=1; delay_us(5); result=(bit)(P00x80); LCD_EN=0; return result; } void write_command(uchar command) { while(busy()); LCD_RS=0; LCD_RW=0; LCD_EN=0; P0=command; delay_us(50); LCD_EN=1; delay_us(50); LCD_EN=0; } void write_data(uchar dat) { while(busy()); LCD_RS=1; LCD_RW=0; LCD_EN=0; P0=dat; delay_us(50); LCD_EN=1; delay_us(50); LCD_EN=0; } void write_time(uchar addr,uchar num) { //write_command(second_line+addr); write_command(second_line+(addr-4)); delay_ms(5); write_data(0x30+num/10); delay_ms(5); write_data(0x30+num%10); delay_ms(5); } void write_date(uchar addr,uchar num) { write_command(first_line+addr); delay_ms(5); write_data(0x30+num/10); delay_ms(5); write_data(0x30+num%10); delay_ms(5); } void write_symbol(uchar addr,uchar symbol) { write_command(second_line+addr);