Pointer within the scope of the full scale movement should be smooth and flexible.doc

Pointer within the scope of the full scale movement should be smooth and flexible.doc

  1. 1、本文档共5页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
PointerwithinthescopeofthefullscalemovementshouldbesmoothandflexiblePointerwithinthescopeofthefullscalemovementshouldbesmoothandflexible

Pointer within the scope of the full scale movement should be smooth and flexible. The error and hysterisis error value shall comply with the provisions of the meter accuracy. (3) the prescribed under the working conditions of inclined or after tapping watchcase, pointer displacement shall comply with the provisions of the meter accuracy. 2. Digital display instrument should be clear and stable value, within the scope of the measuring the error value shall comply with the provisions of the meter accuracy. 3. The record pointer instrument calibration and test parts shall meet the following requirements: (1) meter in the full scale within the scope of the error and hysterisis error value shall comply with the provisions of the meter accuracy. (2) the recording mechanism of marking or printing point should be clear, typed movement should be normal. (3) record the number and the color should be printed on paper with the switch and the number of terminals on the logo. 4. Float type level gauge can be used ultra-leftwing calibration method or wet calibration method. Ultra-leftwing hang the determination of quality of the conversion and wet calibration test medium density, shall comply with the requirements of the products design using state. 5. Storage tank level gauge, level gauge can be directly after the installation is completed simulation level calibration. 6. Weighing instrument and sensor can be directly after the installation is completed uniform load calibration standard weight. 7. The amount of measuring displacement, vibration, speed and other mechanical instrument, can use a dedicated test equipment calibration and test. 8. Analysis instrument display instrument parts shall be carried out according to the requirements of this section to display instrument calibration. Its properties, such as testing, sensing, conversion of testing and calibration, including the test with the requirements of standard sample, shall comply with the provisions of the de

文档评论(0)

cxiongxchunj + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档