data capture, navigation, and export using a garmin i i i+（数据采集、导航，并使用garmin的我+出口）.docVIP

Basic GPS Capture, Edit, Navigation, And Import/Export Using A Garmin GPSmap 60C Carl Beyerhelm – GIS, GPS, and Data Management – Coconino National Forest – Revised 26-Jan-2006 All GPS screen illustrations are from a Garmin GPSmap 60C running software version 4.00. Other Garmin models may have similar, though not identical, screens. Position Format And Map Datum Garmin GPS units capture and store positions as WGS84 latitude and longitude decimal degrees. Although users can set how positions are displayed on-screen, these settings have no effect on how positions are captured or stored internally. To configure on-screen position display, press Menu twice, select Setup, press Enter, select Units, and press Enter. Then select the Position Format and Map Datum fields in succession, and set as described below. Format UTM UPS and datum NAD27 CONUS (left) will capture and store GPS positions in WGS84 decimal degrees, but will display them on-screen as Universal Transverse Mercator (UTM) NAD27 coordinates. Format hddd.ddddd and datum WGS 84 (right) will capture and store GPS positions in WGS84 decimal degrees, and will also display them on-screen as WGS84 decimal degrees. Note: If you plan to hand-copy or report GPS coordinates directly from the screen, it will be critical to use the position format and map datum that match the standard set by the recipient (GIS, fire dispatch, etc.). On the other hand, if you plan to download tracks or waypoints electronically (using DNR Garmin, for instance), it doesn’t matter how position format and map datum are set. Satellite Screen Press Page until the Satellite screen is displayed. Capture A Waypoint Unless needed for ongoing work or future download, delete all existing waypoints. This may help avoid duplication, or confusion. To delete all existing waypoints: Press Find, select Waypoints, and press Enter. A list of available waypoints will appear, as at left. Press Menu, select