《机械制造毕业设计说明书模板.docVIP

摘要关键词 Abstract Mechanical manufacturing technology of mechanical engineering design is a process, which bring the drawings of machine or parts converting the method of manufacturing. Fixture design is a combination of parts processing method and machine tool that makes for qualified parts. The two design process can be applied to mechanical knowledge of various fields, including Basic Technology of Exchangeability Measurement, Mechanical Designing, Mechanics, Technology, Numerical Control, Fixture, Machine Tool, Material Forming and so forth. Though such a design process, designers can make comprehensively use of mechanical knowledge in various aspects, and therefore take the theoretical knowledge into practice. This topic design sleeve processing, which need 17 procedures and three of the process to fixture, workstage 13 milling machine fixture、workstage 14 drilling of clamping fixture and workstage 1 drill hole inclined fixture, the three workstage of fixture in order to improve the efficiency of fixture design that adopted in both the piston cylinder pneumatic clamping device, the positioning a hole side a pin localization method, among the positioning of workstage 13 and 16 process the role of scale mark. Key words：Sleeve； Process design； Fixture design； 目录 摘要 ⅠABSTRACT Ⅱ目录 Ⅲ前言 Ⅴ1 国内外工艺夹具设计的现状及前景 1 1.1 国外工艺夹具设计的现状及前景 1 1.2 国内工艺夹具设计的现状及前景 2 2 本课题研究的内容及目的 3 2.1本课题研究的内容