outlinenotes- massachusetts instituteof technology（outlinenotes——马萨诸塞州技术协会）（30页）.docVIP

Guide to Notes: Overview: Multi-step and distributed processing using quasi-observations 2 Automatic processing with sh_gamit and sh_glred 3 Evaluating results 4 process.defaults 5 site.defaults 7 sestbl. and sittbl. 8 autcln.cmd 9 rcvant.dat and hi.dat 11 Antenna effects 12 Tropospheric effects 13 sh_metutils 14 Using GAMIT effectively (pitfalls and refinements) 15 Using GLOBK effectively (subtleties and pitfalls) : what globk does 16 What glorg does 17 globk/glorg: parameterization and controls 18 globk/glorg command file templates 20 Using glist 25 Defining the reference frame 26 Analysis example with earthquakes : S.California 1992-1999 27 Error analysis and data weighting 30 Abbreviations for References: IntroGG : Introduction to GAMIT/GLOBK GAMIT : GAMIT Reference Manual GLOBK : GLOBK Reference Manual All available at /~simon/gtgk/docs.htm  Overview: Multi-step and distributed processing using quasi-observations GAMIT (each network each day) Primary observations = phase Estimated parameters = station coordinates; zenith delays, gradients, ambiguities, EOP, orbital parameters Output = h-file of parameter estimates and covariances—loosely constrained GLOBK (combination of networks and days) Quasi-observations = multiple h-files of coordinates, EOP orbital parameters (or SINEX without orbital parameters) Estimated parameters = coordinates and velocities, daily or multiday orbits Constraints = finite or generalized Output = time series or combined h-file; tables of positions and/or velocities for plotting References: IntroGG, Chapter 1; GLOBK, Chapter 1 Dong et al. [J. Geod. 72. 200–214, 1998] Automatic processing with sh_gamit and sh_glred Setup Make experiment directory; sh_setup; copy RINEX files Commands sh_gamit –s 1998 151 154 –expt emed –orbit IGSF -pres sh_glred –s 1998 151 1998 154 –expt emed –ncomb 1 –opt H G E Data files to be accessible raw an