ppt课件-intro.tothe smith chart- f s a r c（介绍。史密斯圆图- f s r c）.pptVIP

Background Philip Smith of Bell Laboratories developed the “Smith Chart” back in the 1930”s to expedite the tedious and repetative solution of certain rf design problems. These include: Transmission line problems Rf amplifier design and analysis L-C impedance matching networks Plotting of antenna impedance Etc. CONSTRUCTION The Smith Chart is made up of a family of circles and a second family of arcs of circles. The circles are called “constant resistance circles” The arcs are “constant reactance circles” Impedances must be entered in rectangular form – broken down into a real and an imaginary component. The real part (resistance) determines the circle to use. The imaginary part (reactance) determines the arc to use. The intersection of an arc and a circle represents the plotted impedance. Normalize Load Z Since the cable impedance is 50 ohms, we must divide the load impedance by 50 to plot it on the Smith Chart. ZL (normalized) = (25 + j50)/50 = 0.5 + j1.0 Plotting Place a dot at 0.5+ J1.0 Extend a radial line from the center through 0.5+j1.0 to the “wavelengths toward generator” scale on the periphery. Read approx. 0.1345 Add 0.172 to get 0.3065 Extend another radial line from the center through 0.3065 on the “wavelengths toward generator” scale. Plotting Cont’ Place one leg of your dividers on the center and the other leg on 0.5+j1.0 Draw an arc clockwise (0.172 wavelengths) to the second radial. Read approx. 1.4 – j1.8 at the intersection. Multiple by 50 to un-normalize. Z at sending end is approx. 70-j90 ohms (An inductive antenna impedance looks capacitive at the transmitter.) * Intro. to the Smith Chart Transmission Line Applications Antenna Z known, find Z at transmitter ___________________________________________________________________ Assume an antenna impedance (ZL ) of 25 + j50 ohms Let characteristic impedance of the transmission line = 50 ohms Let velocity factor of cable (vf) = 0.66 Let p