switch configuration- q logic（- q开关配置逻辑）.docVIP

Index Date Uptime Show about Show chassis Show switch Show config switch Config list Show setup services Show setup system Show setup snmp Show interface Feature log Show users User accounts Whoami Show timezone date - This command displays or sets the system date and time. Usage: # help date date [MMDDhhmmCCYY] SANbox-top207 # date Mon May 14 14:58:14 CDT 2007 Summary: It is recommended to set the date on the switch to determine exact timeframe of when a particular event occurred. uptime - This command displays the amount of time the switch has been in operation. Usage: # help uptime uptime SANbox-top207 # uptime Elapsed up time : 7 day(s), 4 hour(s), 57 min(s), 12 sec(s) Reason last reset: NormalReset Summary: Using Uptime information can be very helpful in determining how long a switch was up and running. Also included is what happened to reset or clear the uptime counter. There are several types of Reason last reset: NormalReset - Switch was manually reset using reset command HardReset - Switch was manually reset using hardreset command HotReset - Switch was manually reset using hotreset command PowerUp - Switch was powered ON FailedNDCLA - Switch had failed firmware update using NDCLA show about - This command displays an introductory set of information about operational attributes of the switch. It is functionally equivalent to the show version command. Usage: # show about SANbox-top207 # show about ***************************************************** * * * Command Line Interface SHell (CLISH) * * * ***************************************************** Index SystemDescription SANbox 9000 Series EthNetworkAddress 07 (use set setup system to update) +EthMACAddress CPU0 00:c0:dd:0c:db:db