Gravity Die Casting Machine JDAB500.docVIP

Gravity Die Casting Machine JD-AB500I. Introduction1. ApplicationJD-AB500 gravity die casting machine is used for producing copper alloy castings of large and medium size or castings of small size whose molds contains several cavities.2. Machine componentsThe machine consists of three parts, such as mechanical part, pneumatic part and electrical part. Material used in mechanical part is well-selected steel. Both pneumatic and electrical part use products of world-famous brands. Therefore we can assure you that our products are of high quality.3. Main specifications and technical parameters:(1) Maximum outlined diameter of mold: 500 mm(2)Maximum weight of mold: 150 kg(3)Maximum distance of mold baseplate: 510 mm(4)Maximum clamping stroke: 270 mm(5)Angle range of lateral casting: 0~90 deg(6)Angle range of pre-casting: 0~110 deg(7)Angle range of mold immersion: 0~90 Centigrade(8)Oil pressure: 50~70 bar(9)Power capacity: 5.25 kw(10)Three phase power: 380 V/ 50Hz(11)Oil tank capacity: 220 L(12)Capacity of mold immersion tank: 750 L(13)Machine weight: 2000 kg(14)Machine size( L× W× H): 1650mm× 2300mm× 1720mmII. About the after- sale servicesIn the meantime, we own strong administrant and technical teams to ensure that our innovation and improvement ability can keep up with changeable market requirements. In order to satisfy our customers better, we can also make machines according to our customers specific needs.Our after-sale service is prompt and patient. Once you place an order, we are willing to give you support in installment and labor training. During the production period, if you meet any problems that you are not able to deal with, you could contact us. We will try our best to help.