数字信号处理探索.docxVIP

题目*****************学生姓名: ***学科专业: 电气工程及其自动化指导教师: ***摘 要近年来，应用模电技术开发的电源在性能、质量和功能上无法满足人们的使用要求，但由于世界经济和部分行业的快速发展，变频电源的使用又十分的广泛，这使得有关行业的发展和技术进步受到了严重的影响。所以，对于更好的变频电源的研究有着极为重要的意义。本文提出了基于DSP空间矢量变频电源，这种电源不仅可以降低电路的难易程度，而且还十分经济，性能上也十分可靠。为实现智能数字化的变频电源，本文以TMS320F2812芯片产生的脉宽调制的波形，该波再通过放大，然后用于IPM中的IGBT驱动，控制电源输出的电压和频率。本文是以变频电源的逆变输出和数字控制方式为研究重点，先是对变频电源主电路的设计，逆变输出采用IPM模块，再是设计基于DSP的控制系统硬件电路，脉宽调制接口电路，A/D转换电路。最后，在完成整体的软件规划和设计流程。该电源的性能、质量和功能均可达到人们的使用需求且不影响对其本身的系统升级。且非常的经济实用，大小、质量和消耗都极低，具备较高的安全性和可靠性。设计中，参考了许多国内外资料，数字信号处理的变频电源的设计都是在此基础上进行的，各个部分的电路都十分缜密，性能、质量和功能都达到了预期的目标。关键词:变频电源；DSP；空间矢量；脉宽调制技术；数字信号处理AbstractIn recent years, application of analog electronic technology development power in the performance, quality and function of unable to meet the requirements of people, but due to the rapid development of world economy and in some industries, the use of variable frequency power supply and is very widely, which makes the industry development and technological progress by the serious impact. So, the research on the better frequency conversion power supply has a very important significance.In this paper, based on the DSP space vector frequency conversion power supply, this kind of power supply can not only reduce the difficulty of the circuit, but also very economical and reliable performance. In order to realize the intelligent digital frequency conversion power supply, this paper uses the pulse width modulated waveform generated by the TMS320F2812 chip, which can then be amplified, then used for the IGBT driver in IPM to control the output voltage and frequency of the power supply.This paper is in frequency conversion power supply inverter output and digital control mode is the focus of the research, first design of the main circuit of inverter power supply, inverter output the IPM module, then design the hardware circuit of control system based on DSP, the pulse width modulation circuit, a / D conversion circuit. Finally, in the completion of the overall software pl