华为浮动静态路由路径备份配置实例.docxVIP

华为 浮动静态路由路径备份配置实例作者：救世主220实验日期：2015.7.3实验拓扑如下：AR1配置：[AR1]dis current-configuration [V200R003C00]# sysname AR1#interface GigabitEthernet0/0/0 ip address 100.1.1.1 255.255.255.0 #interface GigabitEthernet0/0/1 ip address 10.0.21.1 255.255.255.0 #interface LoopBack0 ip address 1.1.1.1 255.255.255.0 ospf network-type broadcast#ospf 1 router-id 1.1.1.1 import-route direct area 0.0.0.0 network 1.1.1.1 0.0.0.0 network 10.0.21.1 0.0.0.0 #ip route-static 3.3.3.0 255.255.255.0 100.1.1.2 preference 10ip route-static 10.0.23.0 255.255.255.0 100.1.1.2 preference 10注意：AR1上g0/0/0 断开前后AR1路由表变化AR2配置：[AR2]d