车床上碟簧作动力时弹簧夹头夹紧及松开机构设计【毕业论文+CAD图纸全套】.doc

毕业设计说明书（论文）中文摘要 摘要： 本文是设计了一种车床用碟形弹簧做动力时弹簧夹头夹紧及松开机构。该机构主要由弹簧夹头、拉杆、碟形弹簧、气动三联件等几部分组成。工作原理主要是通过螺母套对碟形弹簧施加一定的轴向力，碟形弹簧安装在拉杆上，间接对拉杆产生推动力推动推承套向右移动，推成套装配在弹簧夹头上，弹簧夹头与法兰相接触，利用推承套上的锥度形状将轴向力转换成径向力，使弹簧夹头产生夹紧力对工件实现夹紧。再通过气动三联件对气缸活塞杆产生推动力，而活塞杆与拉杆通过拨块相连接，所产生的推动力大于螺母套施加的力，拉杆得以向左移动，推承套失去推动力与弹簧夹头分离，弹簧夹头实现对工件的松开。 而本次设计的夹具与以往的卡爪式夹紧松开机构相比较，拥有更好的平衡性能、夹紧牢靠、结构紧凑、便于操作、加工及更换方便等主要优点。在主轴高速旋转的情况下，也能达到需要的平衡要求。是高效率和良好精度特点的现代车床夹具，可以有效地减少时间基本和配套工件加工的时间，大大提高了劳动生产率，有效地降低了劳动强度。 关键词：数控车床 夹紧机构 弹簧夹头 夹紧动力 毕业设计说明书（论文）英文摘要 Title Design Control collet chuck clamping and release mechanism is in a lathe powered by a conical spring Abstract This article is designed to do when one kind of lathe with power disc spring collet chuck clamping and release mechanism. The agency consists of several parts collets, rod, disc springs, pneumatic FRL and other components. Works mainly on the disc springs exert a certain axial force through the nut sleeve, disc springs mounted on the rod, the rod indirectly generate driving force pushing the push bearing sleeve moves to the right, push the spring clip assembly head sets, spring chuck in contact with the flange using push bearing sleeve taper shape of the axial force is converted into a radial force, so that collet chuck generate clamping force on the workpiece clamping realization. And then the driving force generated by the cylinder piston rod pneumatic FRL, and the piston rod and the rod is connected by dialing block, the driving force is greater than the force exerted by the nut sleeve, lever to move to the left, push the bearing sleeve lose impetus with the spring chuck separation collets achieve workpiece release. The design of the fixture and conventional jaw clamp release mechanism compared with a better balance of performance, clamping reliable, compact, easy to operate, processing and easy replacement of major advantages. In the case of the main shaft rotates at high speed, but also to achieve the desired balance requirements. Modern lathe fixture high ef