快速入门.docVIP

QF500 Series IP Cameras User-Manual Read and understand thoroughly this safety awareness instruction before using and keep it for future reference Interface（Example） Please check if the camera is working normally according to the indications as below. On Flicking Off Alarm light Alarm ----- No Alarm Arm light Arm ----- Disarm Network light Networking Monitoring No network Record light Detect TF card Recording No detect TF card Double color light（Blue） Networking Monitoring No network Double color light（Pink） Detect TF card Recording No detect TF card PIR Infrared detector（5 meters, open this function in “Alarm setting”） Download App For cell phone user Scan the QR code as below or on the package box, download and install the App. Following the instructions to complete the registration (iOS user can download from Apps Store, Search Yoosee and download the App. Android user can access to the website: www.yoosee.co to download the App. Android iOS For PC user Go to website, download CMS. Following the instructions and setting a username and password for the connection with the camera. The default user name: admin. Password: The user name and password for remote access is the same as the mobile App. CMS support will automatically connect a device by LAN search, but you can also manually enter the 3C ID and password to connect the camera. The 3C ID is located at the bottom of the camera or on the packaging box. The 3C ID should contain 7 digits, and the default password is 123. 3 Connect Device By WiFi Connect your mobile device to the wireless router (Please NOTE that the camera Wifi cannot support the 5G network currently). Then Access to the “Yoosee” App on your mobile device, click the “+”