Update on the API Work Group Activities on Pipe 关于管道的工作组活动的更新.pptVIP

Update on the API Work Group Activities on Pipe Markings API Pipe Grades API Pipe Grades API Pipe Grades Historically, it has been a common practice to apply dual-grade markings at the lower end of the grade spectrum The most common dual gradeproduct has always been Grade B/X42 In the last few years, pipe mills have seen an increased number of requests for application of dual-grade markings in upper grades.- X60 / X65-X65 / X70- X60 / X65 / X70-X70 / X80 X52 PSL 1, X60 PSL1, X65 PSL 1, X70 PSL 2, X80 PSL 2 Welding Procedures shall be qualified within the following grade ranges: X42X46, X52, X56 (including intermediate grades) For X60 above, each grade is qualified individually * * * * Grade B, X42, X52, X60, X65, X70, X80 Grade B, X42, X52, X60, X65, X70, X80 And TwoProduct Specification Levels Grade B, X42, X52, X60, X65, X70, X80 And TwoProduct Specification Levels PSL 1 and PSL 2 API Grade X60, PSL 2 Yield Strength Range 60.2 – 81.9 ksi 60 62 64 66 68 70 72 74 76 78 80 82 84 86 88 90 92 94 API Grade X65, PSL 2 Yield Strength Range 65.3 – 87 ksi Yield Strength in ksi API Grade X70, PSL 2 Yield Strength Range 70.3 – 92.1 ksi Other common dual-grade items are: -X42/X46 -B/X42/X46 -X42/X52 - Pipe manufactured as Grade X60 (415) or higher shall not be substituted for pipe ordered as Grade X52 (360), or a lower grade, without the purchasers approval. API Specification 5L Provides Only Minimal Guidelines regarding dual markings for Line Pipe: - API Spec 5L, Annex N specifically allows marking pipe with comparable specifications. This allows pipe to have API markings as well as CSA or ISO designations API Grade X60, PSL 1 Yield Strength Minimum 60.2 (no maximum for PSL 1) 60 62 64 66 68 70 72 74 76 78 80 82 84 86 88 90 92 94 API Grade X65, PSL 1 Yield Strength Minimum 65.3 (no maximum for PSL 1) Yield Strength in ksi API Grade X70, PSL 2 Yield Strength Range 70.3 – 92.1 ksi API Grade X80, PSL 2 Yield Strength Range 80.5 – 102.3 ksi 96 98 100 102