毕业论文-导管螺旋桨CFD的网格无关性验证.docxVIP

摘 要本文为了探究导管螺旋桨数值模拟的网格无关性，使用了网格划分软件Pointwise、Autogrid 5进行网格制作、流体分析软件CFX进行数值模拟。先对二维翼型的网格无关性进行探究，后观察导管螺旋桨是否符合翼型得到的趋势。首先，通过三组二维翼型的数值模拟与实验值的对比，验证了本文使用的数值方法的可靠性；其次，探究了不同最小壁面厚度、网格的结构化和非结构化对翼型网格无关性的影响；之后，探究了不同网格增长率、单侧翼面点数以及一种形式的分块网格对翼型网格无关性的影响；最后，验证最小壁面厚度和单侧翼面点数对二维翼型的影响规律，在导管螺旋桨上是否可行。关键词：网格无关性；翼型；导管螺旋桨AbstractThis paper in order to explore grid independence of ducted propeller grid independence, using Pointwise and Autogrid5, both are grid software, for generating the mesh, and using CFX, a fluid analysis software, to simulate flow fields. After the paper explores the grid independence of two-dimensional airfoil, it observes whether the trend of the ducted propeller is in line with the airfoil. First of all, through the numerical simulation of three groups of two-dimensional airfoil with experimental value contrast, verify the reliability of the numerical method used in this paper; Second, exploring the minimum wall thickness, different grid of structured and unstructured effects on airfoil grid independence; Later, explores the different grid points of growth rate, single wing surface, a form of block grid effects on airfoil grid independence; Finally, verify the minimum wall thickness and single flank surface points on the influence law of two-dimensional airfoil, on the shrouded propeller is workable.Keywords：grid independence, airfoil, ducted propeller目 录摘 要............................................................................................................................IAbstract.............................................................................................................................II第1章 绪 论.............................................................................................................11.1 课题背景及研究的目的和意义............................................................................11.1.1 课题的背景.....................................................................................................1 1.1.2 课题的目的及意义.................