AlSiFe合金半固态成形工艺及性能.pdfVIP

A1．Si．Fe合金半固态成形工艺及性能 A|-S--Fe合金半固态成形工艺及性能 赵树国1,2，袁晓光1，陆启为1，李胜1 (1．沈阳工业大学材料科学与工程学院；2．沈阳航空学院) 合金的微观组织及挤压比与成形温度对组织的影响，检测了合金的力学性能，研究了合金的高温磨 损行为。结果表明，经过半固态成形后，合金第二相发生了明显细化，尖角钝化，且分布更均匀； 随着挤压比的增大和成形温度的降低，第二相破碎效果增强，分布更均匀；常温极限抗拉强度达到 239．6MPa，伸长率达到2．o％；150oC干磨和润滑条件下的磨损失重分别是390铝合金的30．78％ 和3．09％。 关键词：Al—Si—Fe合金；半固态成形；性能 Semi-solidFormed and TechnologyProperties OfAI-S-_Fe Alloy ZHAO Qi-weil，LI Shu-gu01一，YUANXiao-guan91，LUShen91 Industrial (1．ShenyangUniversily； InstituteofAeronautical 2．Shengyang Engineering，Shenyang，110023) Abstrad：Akindof hasbeen semi-·solid tech·· AI··17Si·-5Fe·-3Mn--4Cu--2Ni·-1Mgalloy preparedby forming ofthe andtheinfluenceofextrusionratioand microstructure nology．The alloy formingtemperature havebeen mechanical ofthe havebeen thewear—resist- analyzed，the propertiesalloy tested，and andthewearfailureformofthe havebeenstudiedweartest．Theresultsof ingproperly alloy by showthatthesecond inthesemi—solidformedbeComefineand its study phase alloy spherical，and distribution extrusionratioandthelower thinner bigger homogeneous．The formingtemperature，the microstrudureandfhesecond ofthe hasfhemore microstructure．andthe phase alloy symmetricaI be竹erofitsdistributionbecomes．Theultimatefensile and offhe are