the analysis of the reservoir simulation result(历史拟合与开发预测).ppt

UNIVERSITY PETROLEUM OF CHINA, BEIJING DEPARTMENT OF PETROLEUM GAS ENGINEERINGRESERVOIR NUMERICAL SIMULATION GROUP Han Hongbao Mar. 13 , 2003 In the fist part, we introduce “What is reservoir numerical simulation”, “Why do we need reservoir numerical simulation ”and “How to do reservoir numerical simulation ” etc. In the second part, we will introduce the results and analysis of “history matching ”and “performance prediction ”. But how to analyze the results of reservoir numerical simulation? And what is the use of the result of reservoir simulation? Now we will introduce it: There are two kinds of result of reservoir numerical simulation: The result of history matching and the result of performance prediction. For an old oil field, history matching and performance prediction are needed. But for a new field, only the performance prediction is needed. ummary cknowledgement istribution of NP D istribution of P D Istribution of So NP P D From the distribution of residual oil saturation (figure 10), stock tank residual oil (figure 11) and pressure (figure 12), we know where the residual oil concentrates, the effect of the inject wells and the distribution of energy. And we efficiently take measures to enhance the oil recovery (according to the results). erformance prediction P The exploitive target of performance prediction The analysis of curve between η and time The analysis of curve between fw and η The analysis of curve between P and time 1.time(year or day, t) 2.oil recovery(η) 3.water cut(fw) 4.the average pressure of the formation(P) xploitive targets E Cheme design S In order to investigate the effect of the exploitive targets on the different conditions, we design 4 schemes below: Reservoir picture of changqing oil field Pinch Cheme design S Scheme 1: production at present condition Scheme 2: drill new wells in the districts of residual oil concentration Scheme 3: change the oil wells which water cut is lager t