刀片相关网络技术Blade Network Training-Key-Technology.pptVIP

HP presentation template user tutorial Name of your presentation here HP template 刀片相关网络技术简介Chen KaiQi 关键技术 VLAN配置 Trunk/Tag 端口绑定 Spanning Tree 上联端口检测 Introduction to Basic Switching Layer2-Forwarding Frame Introduction to Basic switching VLAN Trunking Trunk链路（trunk link）可以传输多个VLAN的信息帧。Trunk Link通常位于交换机之间或交换机与路由器之间。 802.1Q Trunking 802.1Q tagging 802.1Q tagging 802.1Q Tagging 802.1Q Tagging ---------Format 802.1Q Tagging H3C and Cisco configuration Trunk configuration Assign Ports to VLAN Display VLAN information LACP introduction Link aggregation configuration Link aggregation configuration Uplink Failure Detection GBE2 uplink Failure Detection (UFD) UFD allows the switch to monitor specific uplink ports to detect link failures. When the switch detects a link failure, it automatically disables specific downlink ports. The corresponding server’s network adapter can detect the disabled downlink, and trigger a network-adapter failover to another port on the switch, or another switch in the chassis UFD ---Ltm and Ltd The following figure shows a basic UFD configuration, with a Failure Detection Pair (FDP) that consists of one LtM (Link to Monitor) and one LtD (Link to Disable). When the switch detects a link failure in the LtM, it disables the ports in the LtD. The server blade detects the disabled downlink port, which triggers a NIC failover UFD---Diagram UFD Configuraion Cisco---Link state Track Cisco----Link state Track Procure---------UFD Spanning Tree Protocol Spanning Tree Without Spanning Tree Protocol----Loops ! With STP-------No Loops! 802.1D STP Port states 802.1w (RSTP) STP features comparison Cisco and H3C STP configuration 802.1s (MSTP) MSTP configuration MSTP configuration 附录1: Cisco and Gbe2 术语 附录2 Cisco and VC H3C and Cisco VC connect Tunnel Map VLAN tags setting It is important to note that the behavior of both vNets and Shared Uplink Sets is dependent on whether VLAN Tunnel or Map VLAN Tags is set. Server VLAN Tagging Suppo