FRANC3D_V7.0新版本功能介绍.pdf

FRANC3D Version 7 Development Fracture Analysis Consultants, Inc. June 2014 Version 6 Version 7 Changes from Version 6 to Version 7 Main window: setting speed of rotation and translation setting and saving camera positions buttons for setting clipping planes and center of rotation Cut Planes: Set Speed: Entire model Allows user to cut away a portion of the model based on cutting planes aligned with the global Cartesian axes. Controls the speed of rotation, translation and zooming when “moving” the model with the mouse. Clipping Recenter Visual display of front and back clipping planes Default center of rotation is the center of the model Version 7 New Features ? New geometric intersection engine for crack insertion (increased robustness) ? ABAQUS/ANSYS GUI “look feel” emulation ? Built in sub-model generation tool ? Expanded Fatigue Crack Growth Rate library ? Expanded automatic FCG stopping options ? Robust automatic method for fatigue life integration 5 New Geometric Intersection Engine 6 ? The algorithms that compute the intersection curves between a flaw and the uncracked body and “trim off” portions of a flaw that fall outside have been completely rewritten. ? Testing has focused on models that failed in the previous version. The new algorithms are proving to be much more robust. Sub-Model Generation Tool 7 Sub-Model Generation Tool 8 Sub-Model Generation Tool 9 ABAQUS/ANSYS Emulation 10 FRANC3D can be run in emulation mode, which mimics the model display and view manipulation “look feel” used by ABAQUS/CAE or ANSYS/Classic Fatigue Crack Growth Rate Model Library 11 ? Separate growth rate and R-ratio models (except NASGRO eqn.) ? All model can be specified as temperature dependent Growth rate models: ? Paris ? Bi-Linear Paris ? Sigmoidal ? Hyperbolic Sine ? Tabular ? NASGRO R-ratio models: ? None ? Walker ? Closure ? Tabular Paris Bi-Linear Paris Sigmoidal Hyperbolic Sine Tabular