Satellite_3000_Series笔记本维修技术手册.pdf

Tough Enough for Today’s World FIELD REPLACEABLE UNIT DOCUMENTATION 3000 Series Satellite GENERAL INFORMATION TM Before attempting any of the following procedures, make sure that the main battery and AC adaptor is not connected to the unit and the environment in which you are working on is protected from Electro-Static Discharge(ESD). TOSHIBA Tools Required for Proper Disassembly and Reassembly: 1. Phillips screwdriver (Size 0) 2. Phillips Screwdriver (Size 1) 3. Flat head screwdriver (5mm) 4. Hex driver (5mm) 5. Security Torx(Size8) 6. Case Separator 7. ESD Wrist Strap 8. ESD mats 9. Tweezers FIELD REPLACEABLE UNIT DOCUMENTATION SatelliteTM 3000 Series TOSHIBA Tough Enough for Today’s World TABLE OF CONTENTS: 1. BATTERY PACK REMOVAL 2. OPTIONAL PC CARD REMOVAL 3. MODULAR BAY REMOVAL 4. DVD-ROM/CDR-W DRIVE REMOVAL 5. HDD REMOVAL 6. MEMORY MODULE REMOVAL 7. KEYBOARD REMOVAL 8. CONTROL BOARD REMOVAL 9. COOLING MODULE REMOVAL 10. CPU REMOVAL 11. TOP COVER REMOVAL 12. VIDEO BOARD REMOVAL 13. MODEM BOARD REMOVAL 14. WIRELESS LAN CARD REMOVAL 15. SYSTEM BOARD REMOVAL 16. DISPLAY MASK REMOVAL 17. FL INVERTER AND LCD REMOVAL BATTERY PACK REMOVAL OPTIONAL PC CARD REMOVAL TOSHIBA Tough Enough for Today’s World 1. Turn the computer upside down as shown. 2. Slide the battery release lever in the direction of the arrow. 3. Slide the battery pack forward and lift it out. 1. Push the eject button to pop it out. 2. Press the eject button and remove the PC card. NOTE: Before removing any PCMCIA device, make sure it is “STOPPED” in the PC Card Manager. FIELD REPLACEABLE UNIT DOCUMENTATION SatelliteTM 3000 Series MODULAR BAY REMOVAL 1. Turn the computer upside down. 2. Slide the release lever in the direction of the arrow. 3. Pull out the modular bay device in the direction of the arrow. DVD-ROM/CDR-W DRIVE REMOVAL Release lever Select baydevice Battery pack Battery release lever Eject button PC card DVD-ROM/CDR-W M2.5x4 black screws