7-16RF connector.pdf

14-2 7/16 PAGE Introduction 3-4 General 5 Finder guide 6 Interface 7 Characteristics8-9 Straight plugs 10-11 Right-angle plugs 12 Straight jacks 13 Square flange straight jacks 14-15 Bulkhead mount straight jacks 16 Receptacles17-18 In series adapters 18 Between series adapters 19 Cable assemblies 20-25 Panel drilling 26 Assembly instructions27-34 CONTENTS 7/16 14-3 The Radiall 7/16 series has been developed using the latest advances in connector design. These connectors are easy-to-use, highly reliable, innovative and are designed to meet the needs of Telecommunications market. The complete series features the following characteristics: ? extensive range, with optimized component part design, ? upgraded cross-knurled coupling nut allowing better manual tightening. EZ FIT connectors We have developed EZ FIT connectors for 1/4, 3/8, 1/2 superflexible corrugated cables and for 1/2 and 7/8 flexible corrugated cable with 2 piece parts for easy and quick outdoor installation. Only 3 assembly steps: ? ? ? Our standard EZ FIT 7/16 connectors for corrugated cables have been specially designed to fit both HELIAX coaxial cables and CELLFLEX , HYPERCELL cables. We can also develop custom 7/16 connectors to be assembled on your specific corrugated cable. We offer connectors for superflexible corrugated and flexible corrugated cables. The difference between both corrugated cable types stands in the conformability, as shown here below.1- Strip your cable using Radialls stripping tool. 2- Screw the clamp nut onto your cable. Helical cable = Superflexible cable. INTRODUCTION 3- Screw the body onto the clamp nut using Radiall’s torque wrench. Ring cable = Flexible cable. 14-4 7/16 INTRODUCTION 2 types of coupling nut High performance range ? Frequency range: DC - 7.5 GHz ? 2 types of coupling nut: - cross-knurled and 6 flats 27mm wide coupling nut (3 000 N.cm), - 6 flats coupling nut (32 mm wide), allowing high coupling torque (3 500 N.cm), thanks to torque wrench. ?