含持续预载的旋转弹簧振动系统键合图建模与仿真.pdfVIP

振动与冲击 第 30 卷第 5 期 JOURNAL OF VIB民ATION AND SHOCK Vol.30 No.5 2011 含持续预载的旋转弹簧振动系统键合圈建模与仿真 庸进元，陈海锋 (中南大学现代复杂装备设计与极端制造教育部意点实验烹;中南大学机电工程学院，快沙 41 ∞83) 摘 要:针对键合困难以表达的弹簧初始载荷的添加和保持问题，以含持续预载的旋转弹簧振动系统为研究对 象，用两个容性元件描述含持续预载的弹簧，根据振动系统的拉格朗日方程，建立接个系统的键合阁模型，果用 20 sim 仿真软件对含有持续预载和不含持续预载的模型分别进行仿真，研究其对质最块振动特性的影响，为验证键合阁模型的 正确性，远用 ADAMS 软件对系统进行动力学仿真，两种软件仿真结果册行对比，验证含持维预载的旋转弹簧振动系统键 合阁模型的正确性。 关键词:持辑预载:弹簧;键合阁理论;动力学仿真; 20-sim 中团分提号: TH113.1 文献标iR码 :A Modeling and simulation for bond graph of a vibrating system containing a rotating and sustainably pre-loading spring TANG lin-yuan , CHEN Haijeng (Key Laboratory of Modem Complex Equipment Design and Extreme Manufacturing of Ministry of Education , Schω，lofM创 hanical and Electrical Engineeri吨， Central South University. Changsha 41 ∞83 ， China) Abstract: Aiming at the problem of adding and keeping pre-loading of spring which was difficult to express with bond graph , a vibrating system containing a rotating and sustainably pre-loading spring was selected as a subject to be studied. The sustainably pre-loading spring model was deseribed by using two l-p。此 capacitors and the bond graph model of the vibrating system was established based on Lagrange equations. In order to study the influence of the sustainably pre? loading spring on dynamic characteristics of the mass , the advanced software 20 幅 sim was used to simulate the dynamic behavior of the model. Finally , the results were compared with those using ADAMS to check the bond graph mod