Guizhi Decoction semi-bionic extraction and alcohol precipitation method the best concentration of the preferred alcohol precipitation.docVIP

 PAGE \* MERGEFORMAT 13 Guizhi Decoction semi-bionic extraction and alcohol precipitation method the best concentration of the preferred alcohol precipitation [Abstract] Objective Optimization Guizhi Decoction semi-bionic extraction and alcohol precipitation (SBAE) method was the best concentration of alcohol precipitation. Methods preferred semi-bionic extraction of the best, the best combination fried mixed extract preparation, the extracts were as glycyrrhetinic acid, cinnamic acid, flavonoids, the determination of dry extract, preferably the best concentration of alcohol precipitation. Results concentration of 70% ethanol precipitation of the comprehensive evaluation of liquid Y SBAE significantly higher than other ethanol precipitation concentration SBAE fluid. Conclusion Guizhi soup SBAE ethanol precipitation method with 70% concentration is better. [Keywords:] Guizhi soup, half-bionic extraction, alcohol precipitation concentration Abstract: Objective To optimize the alcohol concentration of Guizhi Gancao Decoction extracted by semi-bionic alcoholic extraction (SBAE). Methods Extracts were prepared by the best semi-bionic extraction technology and the best combination method. The contents of Glycyrrhetinic Acid, Cinnamic Acid, total flavones, volatile oil and dry extract in the each extract were determined. Results Comprehensive evaluation Y of 70% alcoholic SBAE extract was significantly higher than that of other alcohol concentration SBAE. Conclusion 70% is the best alcohol concentration of Guizhi Gancao Decoction extracted by SBAE. Keywords:: Guizhi Gancao Decoction, semi-bionic extraction, alcohol concentration Guizhi soup from the Gui, Zhigancao composition, with the bushing yang and yang of raw gas, the role of Yang Fu. According to semi-bionic extraction (SBE) theory [1-5], the optimization with uniform design the SBE method Guizhi Decoction and the best combinations of process conditions on the basis of [6-7], for further optimizat