Mindray BC-3000 alarm routine maintenance and common treatment methods.doc

 PAGE \* MERGEFORMAT 5 Mindray BC-3000 alarm routine maintenance and common treatment methods [Keywords:] Mindray BC-3000 alarm handling routine maintenance of common Clinical blood analyzer is the most commonly used laboratory testing instruments, and the testing speed, high accuracy, simple operation, can provide useful and timely test for the clinical indicators. In order to ensure the accuracy of the results, and the CLSI recommended by ICSH reference method [1] and the maintenance of analyzer calibration is important. the use of high frequency and, therefore, most prone to failure, its maintenance and very important. now Mindray BC-3000 TROUBLESHOOTING treatment and maintenance experiences are presented below. A routine maintenance To ensure the stability of the analyzer and the accuracy of the results, after the completion of each day, perform the shutdown process, the instrument will automatically cleaning maintenance. 1.1 every 2 months with distilled water bottles and bottle accessories hemolysin, pay attention to prevent contamination. 1.2 month high set with a sampling device for sampling needle needle position correction. 1.3 If you perform a normal shutdown day, 1 time per week should be “probe cleaning solution soak” operation. 1.4 If you do not shut down 24h continuous use on a daily basis for 1 “EZ soak” operation. 1.5 If you do not shut down 24h continuous use, should be 1 every 3 days “probe cleaning solution soak” operation. When the instrument is total count of 300 samples, counting interface pop-up dialog box, do the sensor cleaning solution soak operation. Links to free paper download Common alarm and treatment 2 2.1 pore blocking occurs during the operation of the alarm if RBC or WBC plugging holes alarm, the analyzer will automatically ???, Paidu fault information on the screen after the district if the alarm display to eliminate, that Paidu success. ??? otherwise in need of manual, “The Service - Main