MVIS-2030 Performance Evaluation of Automatic Hemorheology Analyzer.doc

 PAGE \* MERGEFORMAT 8 MVIS-2030 Performance Evaluation of Automatic Hemorheology Analyzer Of: Li Lina Liu Liang Mei-ying Cheng Ziying [Abstract] Objective: MVIS-2030 fully automatic determination of blood rheology analyzer to evaluate the performance, provide a reference for clinical application. Methods: MVIS-2030 automatic analyzer hemorheology quality control solution and with repeated measurements of a blood repeated at different temperatures measured. Results: MVIS-2030 automatic analyzer intra hemorheology in high precision, medium and low shear rates the CV values were 1.7%, 4.4%, 4.6%, repeat better. whole blood group and 37 10 group of high shear rate, shear rate in the low shear rate were statistically significant differences (P lt;0.05); 25 and 37 group set high, , Comparison of low shear rate were not significantly different (Pgt; 0.05). plasma group and 37 10 group difference was statistically significant compared (P lt;0.01); 25 and 37 group no statistical difference between group significance (Pgt; 0.05). Conclusion: MVIS-2030 automated analyzer test Hemorheology Hemorheology good precision, the temperature has some influence on the measurement results, is too low will lead to higher measured values. [Keywords:] Hemorheology; whole blood viscosity; plasma viscosity; intra precision Rheology is the study of the flow of blood and its physical components, deformation and changes of aggregation and its application in medical science. Hemorheology has been widely used for the diagnosis of cardiovascular and cerebrovascular diseases , efficacy, prognosis of secondary significance [1-2]. The experimental center in February 2009 purchase of Equipment Co., Ltd. Chongqing Tianhai production of MVIS-2030 automatic analyzer rheology, is its performance and precision evaluation. 1 Materials and methods 1.1 Instrument MVIS-2030 automatic analyzer rheology shear rate range of 3 s-1 ~ 200 s-1; whole blood Repeatability deviation: high