On the common sharps injury of skull morphology.docVIP

 PAGE \* MERGEFORMAT 10 On the common sharps injury of skull morphology [Keywords:] sharps injuries skull In this paper, a high degree of corruption in the body, muscle tissue and bones of the skull can not be identified traces of characteristics of injury analysis to explore the factors that the different types of damage to the formation of sharp tool marks, reflecting the special morphological characteristics, with certain laws and stability, on the Damage identification tool to provide objective basis. A knife 1.1 The basic structure of the chopper for the family and within the urban and rural hotels easily succeeded tool, re-499 ~ 900g, length 16 ~ 20cm, width 10 ~ 16cm, blade benefits, knife blade is thin, easy-to-grasp handle a short, easy to use, easy to create cutting wave form or by pulling the formation of wound. 1.2 chopper hit the skull on the cutting characteristics of the formation of the damage caused by damage to the majority of knife blade into the cut line, in the majority of the formation of strip depressed skull fracture or a fracture of strip-shaped holes in the homicide case, as long blade The thin, blade of light, formed in the bone damage is often not serious, repeat the cutting edge of contact with bone when hit his head after the defect often appear, or curl, caused by the formation of thin strip the skull outer table traces the formation and edge defects or crimp area that corresponds to the particular defect, carefully double-check comparison, it is easy to confirm which formed kitchen knives. In addition, repeated several times slash his head, as a result of the deformation before and after the force and the blade, the same bone also can reflect the different types of characteristics, thus infer the time sequence of injury may also be a preliminary judge at the time the attack were Office location and direction of forces. 2 axes (Fu Ren) 2.1 The basic structure of the axes more cumbersome, showing wedge-shaped, short-sharp ed