基于ABAQUS的太阳能聚光器结构分析.docVIP

Mechanical Engineering and Technology 机械工程与技术, 2012, 1, 14-18 /10.12677/met.2012.12003 Published Online June 2012 (/journal/met) Structural Analysis of Solar Concentrator Based on ABAQUS Xiaoyi Shao , Xiao’an Chen , Yu Feng , Guoyang Wu 1 1 1 2 1 The State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 2 Material Engineering Institute, Panzhihua University, Panzhihua Email: xiaoyishao@, xachen@ Received: Apr. 15th, 2012; revised: Apr. 27th, 2012; accepted: Apr. 28th, 2012 Abstract: Solar concentrator is the key component of Concentrating Solar Power (CSP), which has great impact of the wind load and production cost. The wind load can make the condenser move thus deviating from the theoretical position and affecting its efficiency. The efficiency and cost are the most important factors to be considered in the process of building a Solar Thermal Power Plant (STPP). The main research of this paper is to optimize the concentrator structure with ABAQUS Finite Element analysis software on given wind load with different places and structure in order to re- duce the displacement of concentrator, make full use of the material and reduce the cost. This article is to calculate the wind load value of the concentrator by simulating the system with the liquid software then obtains the displacement of the concentrator and analyzes the force of key parts. Therefore, we can adjust its arrangement and design to achieve the optimization purpose. Keywords: Concentration; Structural Optimization; ABAQUS; Wind Load 基于 ABAQUS的太阳能聚光器结构分析 邵晓义 1, 陈小安，冯煜，吴国洋 2 1 1 1 重庆大学机械传动国家重点实验室，重庆 2 攀枝花学院材料工程学院，攀枝花 Email: xiaoyishao@, xachen@ 收稿日期：2012年 4月 15日；修回日期：2012年 4月 27日；录用日期：2012年 4月 28日 摘 要：聚光器是聚光型太阳能热发电系统的核心部件，其结构对风载荷的影响是十分敏感的。风载荷使聚光器 结构产生位移，偏离理论的位置，从而对聚光效率产生影响；同时聚光器结构的设计直接影响生产成本。聚光效 率、生产成本正是太阳能热电站建设的决定性因素。因此本文提出了风载