时间交替ADC通道失配误差的LS法估计 .pdfVIP

学兔兔 第31卷 第5期 仪 器 仪 表 学 报 V01．31 No．5 2010年5月 Chinese Jourual of Scientific Instrument M．dv 2010 时间交替ADC通道失配误差的LS法估计 张 昊，师奕兵．王志刚 (电子科技大学自动化工程学院 成都 611731) 摘 要：提出了一种基于最小二乘法的时问交替ADC通道失配误差估计方法。将时间交替ADC系统中的某个通道作为参考 通道，利用参考通道的输出数据，通过滤波器插值获得非参考通道的理想输 数据。利用最小二乘法分别对非参考通道理想和 实际的采样点进行拟合，结合时间交替ADC系统采样模型，对通道失配误差进行估计。仿真表明，即使在测试信号中含有谐波 信号以及采样通道存在其他随机误差时，利用该方法仍然能将失配误差的计算准确度控制在±5％以内。最后，通过对实际高 速数字化仪通道失配误差的测量证明了该方法的实用性。 关键词：时间交替ADC系统；通道失配误差；最小二乘法 中图分类号：TM835．4 文献标识码：A 国家标准学科分类代码：470．4017 Calculation of channel mismatch error in time．interleaved ADC system using least-squares method Zhang Hao，Shi Yibing，Wang Zhigang (School ofAutomation Engineering，University ofElectronic Science and Technology ofChina，Chengdu 611731，China) Abstract：Based on least—squares method，this paper presents a new approach for calculating channel mismatch errors of time-interleaved ADC system．Considering one channel as the reference channel，the output samples of the reference channel are interpolated to obtain the ideal samples of the other channels．Using least—squares method，the ideal sam— pies and the actual samples of other channels are fitted by sine wave expressions，which are then combined with the sampling model of the time—interleaved ADC system to calculate the mismatch error of the time—interleaved system． Simulations and experiments demonstrate that the calculation accuracy of this method can be controlled within±5％ ． even when there are harmonics in test signal and other random errors in sample channels．Finally，the practicability of the method is verified by the measurement results of channel mismatch erro