Analysis of Ringing and Noise in FE and FDTD Calculated Acoustic Pulse Profiles英文文献资料.docVIP

Applied Mathematics, 2012, 3, 1351-1356 /10.4236/am.2012.330191 Published Online October 2012 (http://www.SciRP.org/journal/am) Analysis of Ringing and Noise in FE and FDTD Calculated Acoustic Pulse Profiles Arthur Every , Laurent Aebi , Jurg Dual 1 2 2 School of Physics, University of the Witwatersrand, Johannesburg, South Africa Department of Mechanical and Process Engineering, ETH, Zurich, Switzerland Email: arthur.every@wits.ac.za 1 2 Received July 3, 2012; revised August 6, 2012; accepted August 13, 2012 ABSTRACT Ringing, i.e. the emergence of an oscillatory tail behind a wave pulse as it propagates through a medium, is a pervasive artefact in FE and FDTD calculated waveforms. It is known to be a consequence of numerical dispersion arising from the discretization of the equations of motion. The use of an irregular mesh in a FE code has the further consequence of rendering the displacement field increasingly noisy with distance behind the wave front. In this paper these effects are illustrated using the commercial FE package ABAQUS with square and irregular triangular meshes to calculate the progress of a longitudinally polarized Ricker pulse along the axis of a cylindrically shaped aluminium specimen. We are able to give a precise analytical account of the evolution of ringing on the basis of a low order approximation for the dispersion relation of the discretized equations of motion. A qualitative account is provided of the generation of noise in the use of an irregular triangular mesh. Keywords: Numerical Dispersion; Wave Field Modelling; FE; FDTD Calculations 1. Introduction A clear understanding of ringing may suggest action for mitigating its effects, or provide a useful metric for assessing dispersion. Ringing, i.e. the emergence of an oscillatory tail behind a wave pulse as it propagates through a medium, is a pervasive artefact in