Automated Identification of Basic Control Charts Patterns Using Neural Networks英文文献资料.docVIP

J. Software Engineering Applications, 2010, 3: 208-220 doi:10.4236/jsea.2010.33026 Published Online March 2010 (http://www.SciRP.org/journal/jsea) Automated Identification of Basic Control Charts Patterns Using Neural Networks Ahmed Shaban , Mohammed Shalaby , Ehab Abdelhafiez , Ashraf S. Youssef 1 2 2 1 1 2 Faculty of Engineering, Fayoum University, Fayoum, Egypt; Faculty of Engineering, Cairo University, Giza, Egypt. Email: ass00@.eg, mashalaby@ Received November 11 , 2009; revised December 5 , 2009; accepted December 10 , 2009. th th th ABSTRACT The identification of control chart patterns is very important in statistical process control. Control chart patterns are categorized as natural and unnatural. The presence of unnatural patterns means that a process is out of statistical control and there are assignable causes for process variation that should be investigated. This paper proposes an artificial neural network algorithm to identify the three basic control chart patterns; natural, shift, and trend. This identification is in addition to the traditional statistical detection of runs in data, since runs are one of the out of control situations. It is assumed that a process starts as a natural pattern and then may undergo only one out of control pattern at a time. The performance of the proposed algorithm was evaluated by measuring the probability of success in identifying the three basic patterns accurately, and comparing these results with previous research work. The comparison showed that the proposed algorithm realized better identification than others. Keywords: Artificial Neural Networks (