Bulk Composite Nanomaterial with Multiwall Carbon Nanotubes英文文献资料.docVIP

Materials Sciences and Applications, 2012, 3, 728-732 /10.4236/msa.2012.310106 Published Online October 2012 (http://www.SciRP.org/journal/msa) Bulk Composite Nanomaterial with Multiwall Carbon Nanotubes Levan Ichkitidze , Vitally Podgaetsky , Alexander Prihodko , Sergei Selishchev , Eugenie Blagov , 1* 1 1 1 2 3 3 4 Vyacheslav Galperin , Yuri Shaman , Lyudmila Tabulina 1 National Research University of Electronic Technology (MIET), Moscow, Russia; 2 Institute of Nanotechnology of Microelectronics of the Russian Academy of Sciences (INME RAS), Moscow, Russia; 3 Scientific Manufacturing Complex “Technological Centre”, Moscow, Russia; Belarusian State University of Informatics and Radioelectronics, Minsk, Belarus. 4 Email: leo852@inbox.ru * Received July 17 , 2012; revised August 16 , 2012; accepted September 17 , 2012 th th th ABSTRACT The properties of the composite nanomaterials (CNM) based on bovine serum albumin (BSA) and multi-walled carbon nanotubes (MWCNT), both functionalized and non-functionalized, were investigated. In order to obtain the solid-state bulk CNM from the ultradispersed aqueous solutions of 25 wt% BSA and (0.0015 - 0.04) wt% MWCNT, the methods of nanotechnology and laser technology were used. It is revealed that the CNM density is 10% - 20% higher than that of water and the hardness is higher than that of BSA by a factor of 3 - 6 times. An increase in hardness Hv (by Vickers) of CNM correlated with an increase in the concentration of MWCNT, and Hv reached ~300 MPa for the case of the