HZSM-5上的催化燃烧性能.pdfVIP

  • 7
  • 0
  • 约2万字
  • 约 6页
  • 2017-05-11 发布于河南
  • 举报
HZSM-5上的催化燃烧性能

学兔兔 石 油 化 工 · 216· PETR0CHEMICAL TECHN0L0GY 2013年第42卷第2期 二氯甲烷在CeyV1 OfHZSM-5 I- 催化燃烧性能 刘吕花 ,刘绍英 ,王公应 ,姚 洁 (1.中国科学院 成都有机化学研究所,四川 成都 610041;2.中国科学院 研究生院,北京 100049) [摘要]采用等体积浸渍法制备了不同铈钒摩尔比、不同活化温度(t)和不同负载量( %)的一系yt]w%C%V O /HZSM一5 (,)催化剂,研究了其对低浓度二氯甲烷的催化燃烧活性及稳定性,考察了 (Ce): (V)、负载量、活化温度对催化剂性 能的影响。采用XRD,BET,NH .TPD,XPS等手段对使用前后的催化剂进行了表征。实验结果表明,活化温度为400℃的 15%Ce。 V OflHZSM一5(400)催化剂的活性最好,在反应温度300℃时二氯甲烷的转化率达99.6%,连续反应200 h时二氯甲 烷转化率仍大于95%;使用后的15%Ceo V OflHZSM一5(400)催化剂没有新的物相生成,具有较好稳定性。 [关键词]二氯甲烷;催化燃烧;HZSM一5分子筛;铈钒复合氧化物 [文章编号]1000—8144(2013)02—0216—06 [中图分类号]x131 [文献标志码]A CeyVl Ox/HZSM一5 Catalysts for Catalytic Combustion of Dichloromethane LiuLiihua 一,LiuShaoying ,WangGongying ,YaoJ/e (1.Chengdu Institute ofOrganic Chemistry,Chinese Academy ofSciences,Chengdu Sichuan 610041,China 2.GraduateUniversityofChineseAcademyofSciences,Beijing100049,China) l Abstract j A series of w%CeyVvyOflHZSM一5(f)catalysts with different cerium—vanadium molar ratio and loading were prepared by a wet—impregnation method.The catalytic activity and stability of the catalysts for the catalytic combustion of lOW concentration dichloromethane(DCM)were studied. The effects of cerium.vanadium molar ratio,loading and activation temperature on the catalyst performance were investigated.The fresh and used catalysts were characterized by means of XRD. BET,NH 一TPD and XPS.The results showed that the DCM conversion could reach 99.6

文档评论(0)

1亿VIP精品文档

相关文档