基于SVPWM控制的STATCOM-BESS特性分析与仿真.pdfVIP

学兔兔 第51卷 第18期 电测与仪表 V0L51 NO．18 2014年 9月25日 Electrical Measurement Instrumentation Sep．25~014 基于SVPWM控制的STATCOM—BESS特性分析与仿真 张晓红，孙丽玲 (华北电力大学电气与电子工程学院，河北保定071003) 摘要：针对传统静止无功补偿器(static synchronous compensator—sTATcOM)只能补充无功功率的不足，对直流侧 并联蓄电池储能系统(battery energy storage system—BESS)的改进装置进行了研究，从而实现有功无功功率的双重 控制。首先对STATCOM—BESS工作原理和数学模型进行简要介绍，之后对四象限模式的运行特性进行重点分析， 并研究了基于电压空间矢量 (SVPWM)有功功率无功功率独立控制的电流解耦控制技术。最后在MATLAB／ Simulink中搭建STATCOM—BEss模型进行仿真分析，仿真结果显示装置在快速实现无功功率补偿的同时也可以实 现有功功率的控制，并具有良好的动稳态特性，因此验证了理论分析的正确性和控制方法的有效性。 关键词：静止无功补偿器；蓄电池储能系统；四象限补偿；电压空间矢量；MATLAB 中图分类号：TM933 文献标识码：A 文章编号：1001—1390(2014)18—0062—06 Characteristic Analysis and Simulation of the STATCOM-BESS Based on the SVPWM Control ZHANG Xiao—hong，SUN Li—ling (School of Electrical and Electronics Engineering，North China Electric Power University， Baoding 071003，Hebei，China) Abstract：In view of the disadvantage of the traditional static synchronous compensator (STATCOM)for only replenishing the reactive power。the improved system of the D．C．side—parallel battery energy storage system(BESS) was studied in this paper to achieve the dual regulation of both active and reactive power．At first，the operating principle of the STATCOM-BESS was described briefly and a mathematical model was derived．Besides，the operating characteristics of the four-quadrant compensation model were analyzed particularly．Then the current decoupling control techniques were studied based on the active and reactive power independent control of the SVPWM