Use of the intraosseous screw for unilateral upper molar distalization and found well balanced occlusion 英文参考文献.docVIP

Head Face Medicine BioMedCentral Case report Open Access Use of the intraosseous screw for unilateral upper molar distalization and found well balanced occlusion Ibrahim Erhan Gelgor*1, Ali Ihya Karaman2 and Tamer Buyukyilmaz3 Address: 1Kirikkale University, Faculty of Dentistry, Department of Orthodontics, Kirikkale, Turkey, 2Selcuk University, Faculty of Dentistry, Department of Orthodontics, Konya, Turkey and 3Cukurova University, Faculty of Dentistry, Department of Orthodontics, Adana, Turkey Email: Ibrahim Erhan Gelgor* - egelgor@; Ali Ihya Karaman - ihyaka@; Tamer Buyukyilmaz - tbuyukyilmaz@ * Corresponding author Published: 09 November 2006 Received: 25 January 2006 Accepted: 09 November 2006 Head Face Medicine 2006, 2:38 doi:10.1186/1746-160X-2-38 This article is available from: /content/2/1/38 ? 2006 Gelgor et al; licensee BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Abstract Background: The aim of this study was to present a temporary anchorage device with intraosseous screw for unilateral molar distalization to make a space for the impacted premolar and to found well balanced occlusion in a case. Case presentation: A 13-year-old male who have an impacted premolar is presented with skeletal Class I and dental Class 2 relationship. The screw was placed and immediately loaded to distalize the left upper first and second molar. The average distalization time to achieve an overcorrected Class I molar relationship was 3.6 months. There was no change in overjet, overbite, or mandibular plane angle measurements. Mild protrusion (0.5 mm) of the upper left central incisor was also recorded. Conclusion: Immediately loaded intraosseous screw-supported anchorage unit was successf