超级终端的设计.docVIP

开始→所有程序→附件→通讯→超级终端 输入新建连接名称→ Setting system clock: hwclock: settimeofday() failed: Invalid argument fail Remounting root rw: done Mounting devpts: done Mounting tmpfs: done Mounting applications on /root: yaffs: dev is name is mtdblock3 yaffs: passed flags yaffs: Attempting MTD mount on 31.3, mtdblock3 done Setting hostname: done Backup last logfiles: done Cleaning up system: done Setting up interface lo: done Running start scripts. Starting syslogd: done Starting klogd: done fail Starting custom devices initing: done Running vsftpd server. starting pid 940, tty : /sbin/getty -L s3c2410_serial0 115200 vt100 up-tech login: U-Boot 1.3.2 (Dec 8 2024 - 11:37:21) DRAM: 64 MB Flash: 512 kB NAND: 64 MiB In: serial Out: serial Err: serial Found DM9000 ID:90000a46 at address! DM9000 work in 16 bus width bd-bi_entaddr: 08:00:3e:26:0a:5b [eth_init]MAC:8:0:3e:26:a:5b: Hit any key to stop autoboot: 0 [up-class2410 #] [up-class2410 #] [up-class2410 #] [up-class2410 #] [up-class2410 #] [up-class2410 #] [up-class2410 #] [up-class2410 #] [up-class2410 #] [up-class2410 #] [up-class2410 #] [up-class2410 #] [up-class2410 #] help ? - alias for help autoscr - run script from memory base - print or set address offset bdinfo - print Board Info structure boot - boot default, i.e., run bootcmd bootd - boot default, i.e., run bootcmd bootelf - Boot from an ELF image in memory bootm - boot application image from memory bootp - boot image via network using BootP/TFTP protocol bootvx - Boot vxWorks from an ELF image cmp - memory compare coninfo - print console devices and information cp - memory copy crc32 - checksum calculation date - get/set/reset date time dcache - enable or disable data cache echo - echo args to console erase - erase FLASH memory flinfo - print FLASH memory information go - start application at address addr help - print online help icache - enable or disable instruction cache iminfo - pr