压缩式胶筒肩部突出变形试验研究.pdfVIP

Feb.2012 2012 年2 月 润滑与密封 第37 卷第2 期 LUBRICATION ENGINEERING Vol. 37 No.2 001: 1O.3969/j. issn.0254 -0150.2012.02.024 压缩式胶筒肩部突出变形试验研究 杨志鹏1 ， 2 刘大伟2 许永权2 杨海英2 (1.东北石油大学机械科学与工程学院黑龙江大庆 163318; 2. 大庆油田有限责任公司采油工程研究院 黑龙江大庆 163453 ) 摘要:为了进一步提高封隔器的承压密封性能，利用专用试验装置研究胶筒在不同坐封力及工作压差下的肩部突 出变形;对装有整体伞形保护环的胶筒进行轴向压缩试验，分析伞形保护环对胶筒突出变形的影响。结果表明:压缩式 胶筒在承压过程中进一步被工作压差产生的轴向力压缩，导致胶筒肩部突出变形加剧，并伴随发生蠕动松弛现象，影响 胶筒的密封性能:整体伞形保护环的设计与应用，有利于抑制胶筒肩部的突出变形，提高胶筒的密封住能。 关键词:压缩式胶筒;肩部突出变形;伞形保护环;密封性能 申图分类号: TB42 文献标识码:A 文章编号: 0254 -0150 (2012) 2 -103-3 The Experimental Study on the Edge Protrusive Deformation of the Compression Packing Element 1 2 2 2 Yang Zhipeng ,2 Liu Dawei Xu Yongquan Yang Haiying (1. Sch∞1 of Mechanical Science and Engineeri吨，Northeast Petroleum University ,Daqing Heilongjiang 163318 ,China; 2. Production Engineering and Research Institute of Daqing Oilfield Company Limited ,Daqing Heilongjiang 163453 ,China) Abstract: In order to further improve the packer sealing performance ,the protrusive deformation of packing element un- der different setting force and working press山e was studied by a special e甲ipme时， the axial comp陀ssion of the packing element with whole umbrella-shaped protective ring wωtested ， and 出e effect of the umbrella-shaped protective ring on the protrusive deformation of packing element was analyzed. 咀le results show that the packing element is further compressed by 由e axial force generated by the working press山e in the pressure process ,which causes the deformation intensificat