双曲率变形抛物面天线三维建模方法研究.pdfVIP

双曲率变形抛物回天线三维建模方法研究 王锐，周霄，程海平，陆地 (安徽四创电子股份有限公司，安徽令肥 230009) Research on the Method of Douhle Curvature Deformation of Parabolic Antenna Three 叫 dimensional Modeling WANG Rui.ZHOU Lei.CHENG Hai ping.LU Dj (Anhui Sun Create Electronics Co. .Ltd. •Hefei 230009.China) 摘要:针对设计过程中，对于双曲率变形抛物而 na. Analysis of the geometry of the antenna charac晴 义线，难以使用常规建模方法准确表达的问题，通过 teristics. and put forward a viable method of mod- 分析某型天钱的几何特性，提出一种可行的建模方 eling. Fînally. application of the method in the Pro/ 法。最后应用此法在 Pro/E 中实现了该型夭线反 E in a certain type of reflector antenna to achieve 射面的三维建模，验证了其可行性。 the three - dimensional modeling , to verify its fea- 关键词:~曲率变形抛物面天线i Pro/Ei 三维 sibility. 建模 Key words: double curvature deformation of 中圈分类带2 丁H128 parabolic antenna;Pro/E;three - dimensional mocl- 文献栋i只码 :B eling 文章编号: 1001- 2257(2010)04 … 0077 - 03 Abstract: Accurately modeling is very difficult o ~I 玄 to use conventional methods for the design process of double curvature deformatîon of parabolic anten- 天线是一种发射和接受空间电磁波的机械装 置，应用在霄达通讯等诸多领域。月又曲丑事变形抛物 收稿日期，2009 -11- 25 面天线是霄达天线典型代表，针对其较为复杂的几 其变化很小。 控制[1].轻工机械.2008. (10) :68… 70. [3J * 燕.张栓香.…种电火花加工模糊间隙控制方法研 5 结束语